• Magnetek Product Banners


Legacy Product Manuals

Legacy Controls Products


IMPULSE®•G+ & VG+ SERIES 3

IMPULSE®•VG+ Series 3 Manual #140-10257

IMPULSE®•G+ Series 3 Manual #140-10258


Option Cards, Accessories, and Industrial Communications:

PROFIBUS-DP (SI-P1) Option Card Manual #144-42140

Modbus Plus (CMG5MB+) Option Card Manual #144-42141

Modbus TCP/IP (CM090) Option Card Manual #144-42142


Modbus-RTU Drive Communication Manual #144-42143


Ethernet/IP (CM092) Option Card Manual #144-42576


24/48/120 VAC Interface Board GIF7 #144-42255

24 VDC Interface Card Terminal Designations Addendum For #140-10257, #140-10258) #144-42471

Transition Guides:


IMPULSE®•G+/VG+ Series 2 to Series 3 Product Transition Guide #144-42596

Special Firmware and Functions:

Sway Control Systems (SCS) Series 2 Manual #140-10455


Drive Synchronization Software #140-10259

Bucket Control Manual #140-10331

Footbrake/Static Stepless Simulation Manual #140-10344

Safe-Off Addendum #140-10305


Electronic Programmable Limit Switches

Wireless Radio Control:

RDSI Instructions for Drives and Flex-M #178-01917-0001


IMPULSE®•G+ & VG+ SERIES 2

If you need a Series 2 manual, first determine which software version is in your 

IMPULSE®•G+ Series 2 or IMPULSE®•VG+ Series 2 drive, and complete the following steps:

  1. Power up the drive. The drive will display parameter U1-02, "Output Frequency" on line one.
  2. Press the up arrow key until the keypad displays "U1" on line one and "Monitor" on line two.
  3. Press the key labeled data/enter. The drive displays parameter U1-01, "Frequency" on line one.
  4. Press the up arrow key until parameter U1-14, "Flash ID" is displayed on line one. 
  5. Read and record the value displayed on line two of the display. This is the software version in the drive.

IMPULSE®•VG+ Series 2 Manual (Software Versions 5092/14906) #005-1041

IMPULSE®•VG+ Series 2 Manual (Software Version 14908/14909) #005-1056

IMPULSE®•VG+ Series 2 Manual (Software Version 14911) #005-1059

IMPULSE®•VG+ Series 2 Manual (Software Version 14908-14912) #005-1068


IMPULSE®•G+ Series 2 Programming Guide Addendum (Software Versions 14906/5096/5092) #005-1040

IMPULSE®•G+ Series 2 Manual (Software Versions 14908/14909) #005-1055

IMPULSE®•G+ Series 2 Manual (Software Versions 14911) #005-1058

IMPULSE®•G+ Series 2 Manual (Software Versions 14908-14912) #005-1067

IMPULSE®•G+ Series 2 Quick Reference Guide #005-1093




IMPULSE®•G+ & VG+

IMPULSE®•VG+ Manual #005-1023

IMPULSE®•G+ Manual #005-1019



IMPULSE®•P3 & P3 SERIES 2

IMPULSE®•P3 Manual #005-1065

IMPULSE®•P3 Quick Reference Guide #005-1092

IMPULSE®•P3 Series 2 Standard Manual #005-1069

IMPULSE®•P3 Series 2 Advanced Manual #005-1070

IMPULSE®•P3 Series 2 Quick Reference Guide #144-44031




IMPULSE®•S+

IMPULSE®•S+ Manual #005-1017


IMPULSE®•Si

IMPULSE®•Si Manual #005-1030


IMPULSE®•Sjr

IMPULSE®•Sjr Manual #005-1029



IMPULSE®•Link 

IMPULSE®•Link 4.0 #157-10001


AC Line Regenerative Systems

IMPULSE®•R Manual #146-17040


DataLogger 

DataLogger Series 3 Manual #157-10027

DataLogger Series 3+ Manual #144-16490 



SCS/Sway Control System

SCS/Sway Control System SCSINST-99A



MAC™•2000 Softstarter

MAC™•2000 Motor Acceleration Control Manual #005-1028


Collision Avoidance Systems

Telemotive Laser Guard Manual #TC14K-0


ReFlx® 100 Plus Manual #005-1081


ReFlx® 100 Manual #005-1082




 

©2018 Magnetek Terms and Conditions